T7EE
Denison
| Product Introduction
T7EE-B66-B50-1R00-A5 M0 the exact displacement subsidiary of Denison T7 double hydraulic vane pump that working for high pressure environment. It has been specifically applying for the industry such as packing machines, molding injection machines, press machines, and die casting machines.In this pump the vanes is pushed outward at suction ramp by pin force and centrifigual force. Discharge pressure from separate sources clamps the front and rear side plates. During operation, the vane on the cam ring's major arc propels fluid toward the discharge port, whereas the vane on the minor arc blocks discharge pressure communication with the suction port. To optimize cartridge inlet flow, the cam ring incorporates specific holes.
Configuring diverse cartridges in double pumps delivers either high-pressure/low-flow (up to 320 bar) or low-pressure/high-flow operation, optimizing flow circuit design. The pump also features rapid pressure cycling and precise flow repeatability, making it ideally suited for high-pressure hydraulic presses.
| Specification
Theoretical displacement :213.3ml/rev.
Connection: ISO 6-bolt flange or SAE C 6-bolt flange
Shaft: straight keyed or splined can be available
Seals: both Viton and Buna can be available
Rotationg: right hand or left hand
Flow rate @1500RPM: 31.99l/min(p=0bar), 309L/min(p=140bar), 302.8L/min(p=240bar)
Input power @1500RPM:6.7kW(p=7bar), 77.7kW(p=140bar), 131.2kW(p=240bar)
| Features
The pump achieves low heat generation through high volumetric efficiency, enabling stable operation even at full pressure and speeds as low as 600 rpm. Its high mechanical efficiency (typically 94%) contributes to significantly reduced energy consumption. Noise levels are minimized due to optimized design. Featuring a cartridge kit, the unit facilitates straightforward installation and simplifies maintenance. Service life is extended, while the double lip vane design provides enhanced resistance to particle contamination.
| Application
Metal processing machines
Injection machines
Lubrication machine
Machines tools
Presses machine
Packing machine
| Product Introduction
T7EE-B66-B50-1R00-A5 M0 the exact displacement subsidiary of Denison T7 double hydraulic vane pump that working for high pressure environment. It has been specifically applying for the industry such as packing machines, molding injection machines, press machines, and die casting machines.In this pump the vanes is pushed outward at suction ramp by pin force and centrifigual force. Discharge pressure from separate sources clamps the front and rear side plates. During operation, the vane on the cam ring's major arc propels fluid toward the discharge port, whereas the vane on the minor arc blocks discharge pressure communication with the suction port. To optimize cartridge inlet flow, the cam ring incorporates specific holes.
Configuring diverse cartridges in double pumps delivers either high-pressure/low-flow (up to 320 bar) or low-pressure/high-flow operation, optimizing flow circuit design. The pump also features rapid pressure cycling and precise flow repeatability, making it ideally suited for high-pressure hydraulic presses.
| Specification
Theoretical displacement :213.3ml/rev.
Connection: ISO 6-bolt flange or SAE C 6-bolt flange
Shaft: straight keyed or splined can be available
Seals: both Viton and Buna can be available
Rotationg: right hand or left hand
Flow rate @1500RPM: 31.99l/min(p=0bar), 309L/min(p=140bar), 302.8L/min(p=240bar)
Input power @1500RPM:6.7kW(p=7bar), 77.7kW(p=140bar), 131.2kW(p=240bar)
| Features
The pump achieves low heat generation through high volumetric efficiency, enabling stable operation even at full pressure and speeds as low as 600 rpm. Its high mechanical efficiency (typically 94%) contributes to significantly reduced energy consumption. Noise levels are minimized due to optimized design. Featuring a cartridge kit, the unit facilitates straightforward installation and simplifies maintenance. Service life is extended, while the double lip vane design provides enhanced resistance to particle contamination.
| Application
Metal processing machines
Injection machines
Lubrication machine
Machines tools
Presses machine
Packing machine
