+86-576-87725098     kstyy@kstyy.com
Home » Products » Internal Gear Pump » KHG H1 -50-01 R-V-P-C INTERNAL HYDRAULIC GEAR PUMP FOR METAL PROCESSING MACHINES

loading

KHG H1 -50-01 R-V-P-C INTERNAL HYDRAULIC GEAR PUMP FOR METAL PROCESSING MACHINES

Keister is one of leading manufacturers of hydraulic pumps in China. It's newly developed KHG H1 -50-01 R-V-P-C  is a kind of the hydraulic internal gear pumps of high pressure up to 35MPa, specially designed with the gap compensation,ensuring a high volumetric efficency during entir operating time from low speed (200 rpm to high speed(3000r pm). The internal gear pump primarily consists of the mounting flange, housing, cover, pinion shaft, internal gear, segment and segment support. 
Availability:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Keister is one of leading manufacturers of hydraulic pumps in China. It's newly developed KHG H1 -50-01 R-V-P-C  is a kind of the hydraulic internal gear pumps of high pressure up to 30MPa, specially designed with the gap compensation,ensuring a high volumetric efficency during entir operating time from low speed (200 rpm to high speed(3000r pm). The internal gear pump primarily consists of the mounting flange, housing, cover, pinion shaft, internal gear, segment and segment support. The cast iron of high strength is used in the housing and cover, producing very low sound level. In this internal gear pump , the pinion shaft drives the toothed internal gear in the direction of rotation. The tooth clearances opening in the suction area prime the fluid. Then the fluid is transported into the tooth clearances of the pinion and internal grea from the suction area to the pressure area, resulting the compressive force, which presses the segment and segment support against the tooth tips of the pinion shaft and internal gear.  It works to seperate the pressure area from the suction area with automatic adjustment. It's widely used in metal  processing machines


SPECIFICATION:

Displacement :50.7 ml/rev.

Rated Pressure: 31.5Mpa

Maxium Pressure:35 Mpa

Speed Range RPM: 200-3000

Connection: SAE C 2-bolt flange

Shaft: both straight keyed and splined available

Seals: both Viton and Buna available

Rotationg: right hand or left hand


FEATURES:

Keep high volumetric efficiency, even at low speed and viscosity due to gap comensation design

Little flow pulsation, extending long service life

Low noise level

All frame sizes can be combined with each other into the double or triple pumps.

extended long service life

High resistance to particle contamination

Suitable for fatigue-resistant drives with high power and high pressure with very large load cycle numbers


APPLICATION:

Plastics processing machines

Foundry machines

Lubrication

Machines tools

Automated Presses


Previous: 
Next: 

QUICK LINKS

PRODUCT CATEGORY

CONTACT US

ADD: No. 3 West Road, High-tech Park, Anzhou Street, Xianju County, Zhejiang Province 317300 China
TEL: +0576-87725018
MOBILE: +86-15057281767
FEEDBACK
© 2022 Zhejiang Keister Hydraulic Co., Ltd.  Sitemap | Design by Leadong