Views: 0 Author: Site Editor Publish Time: 2023-01-09 Origin: Site
There are a variety of different HYDRAULIC pumps in application, such as gear PUMPS, VANE PUMPS, piston PUMP, and so on. Among them, VANE PUMP is most popular ones. All HYDRAULIC VANE pumps need to be well maintained during the use process. what are the maintenance precautions for HYDRAULIC VANE PUMP?
Here is the content list:
Daily inspection of HYDRAULIC VANE PUMP.
Check the HYDRAULIC VANE PUMP regularly.
Replacement of HYDRAULIC VANE PUMP components.
In daily work, it’s strongly recommended to check for the use of fasteners, such as checking whether the screws are loose, whether there is oil leakage in the interface of the installation pipeline, and checking and cleaning the oil seal. so as not to affect the service life. In daily use, it is necessary to check whether the oil level of the hydraulic tank meets the requirements, check whether the hydraulic oil contains water and whether there is an abnormal odor. When hydraulic oil contains water, the oil could become cloudy or milky, or some kind of water precipitation could be found at the bottom of the tank. In the case there is a stench could be smelled in the oil, it indicates that the working temperature of the hydraulic oil is too high. When the above situation occurs, please replace the hydraulic oil immediately. find out the cause of the problem and solve it. Check the HYDRAULIC VANE PUMP for leaks daily. When using the HYDRAULIC VANE PUMP, make sure it is operating at the right temperature. Normally, the HYDRAULIC VANE PUMP's operating temperature should be kept between 10 and 50℃. If the operating temperature is too high, the hydraulic vane pump should be stopped immediately until the temperature drops.
The necessary maintenance needs to be done on the hydraulic vane pumps on regular basis. When maintaining the HYDRAULIC VANE PUMP, the HYDRAULIC VANE PUMP must be checked. Moreover, the rubber hose of the hydraulic vane pump is very easy to age and can be checked every three months.
The HYDRAULIC VANE PUMP shall be replaced in time after working for 500 hours for the first time, and the maximum replacement period thereafter shall not exceed 2000 hours. To optimize the service life of hydraulic components, it is necessary to replace hydraulic oil and filter regularly. It is also necessary to keep the hydraulic oil clean, check whether the hydraulic tank meets the requirements, check the water content of hydraulic oil, and whether there is an abnormal odor. During operation, the components of the vane pump should exhaust all the air and after a long time of shutdown, the hydraulic oil can be added.
The above are the precautions for the maintenance of the HYDRAULIC VANE PUMP. In addition, to better perform the maintenance of the HYDRAULIC VANE PUMP, it must be carried out by professional maintenance personnel. Our website is https://www.zjkeister.com/. Welcome your visit to our Website and we are looking forward to cooperation with you. Adhering to the enterprise culture of "quality first, customer first", our Keister Hydraulics has always been your ideal supplier of the hydraulic vane pumps in China.
