loading
| Availability: | |
|---|---|
Keister is one of leading manufacturers of hydraulic pumps in China. It's KHG H0 -16-01 R-V-P-C is a kind of the hydraulic internal gear pumps of high pressure up to 35MPa, specially designed with the gap compensation，ensuring a high volumetric efficency during entir operating time from low speed (600 rpm to high speed(3000r pm). The internal gear pump primarily consists of the mounting flange, housing, cover, pinion shaft, internal gear, segment and segment support. The cast iron of high strength is used in the housing and cover, producing very low sound level. In this internal gear pump , the pinion shaft drives the toothed internal gear in the direction of rotation. The tooth clearances opening in the suction area prime the fluid. Then the fluid is transported into the tooth clearances of the pinion and internal grea from the suction area to the pressure area, resulting the compressive force, which presses the segment and segment support against the tooth tips of the pinion shaft and internal gear. It works to seperate the pressure area from the suction area with automatic adjustment.
SPECIFICATION:
Displacement :16 ml/rev.
Rated Pressure: 31.5 Mpa
Maxium Pressure:35 Mpa
Speed Range RPM: 600-3000
Connection: SAE C 2-bolt flange
Shaft: both straight keyed and splined available
Seals: both Viton and Buna available
Rotationg: right hand or left hand
FEATURES:
Keep high volumetric efficiency, even at low speed and viscosity due to gap comensation design
Little flow pulsation, extending long service life
Low noise level
All frame sizes can be combined with each other into the double or triple pumps.
extended long service life
High resistance to particle contamination
Suitable for fatigue-resistant drives with high power and high pressure with very large load cycle numbers
APPLICATION:
Plastics processing machines
Foundry machines
Lubrication
Machines tools
Automated Presses
Keister is one of leading manufacturers of hydraulic pumps in China. It's KHG H0 -16-01 R-V-P-C is a kind of the hydraulic internal gear pumps of high pressure up to 35MPa, specially designed with the gap compensation，ensuring a high volumetric efficency during entir operating time from low speed (600 rpm to high speed(3000r pm). The internal gear pump primarily consists of the mounting flange, housing, cover, pinion shaft, internal gear, segment and segment support. The cast iron of high strength is used in the housing and cover, producing very low sound level. In this internal gear pump , the pinion shaft drives the toothed internal gear in the direction of rotation. The tooth clearances opening in the suction area prime the fluid. Then the fluid is transported into the tooth clearances of the pinion and internal grea from the suction area to the pressure area, resulting the compressive force, which presses the segment and segment support against the tooth tips of the pinion shaft and internal gear. It works to seperate the pressure area from the suction area with automatic adjustment.
SPECIFICATION:
Displacement :16 ml/rev.
Rated Pressure: 31.5 Mpa
Maxium Pressure:35 Mpa
Speed Range RPM: 600-3000
Connection: SAE C 2-bolt flange
Shaft: both straight keyed and splined available
Seals: both Viton and Buna available
Rotationg: right hand or left hand
FEATURES:
Keep high volumetric efficiency, even at low speed and viscosity due to gap comensation design
Little flow pulsation, extending long service life
Low noise level
All frame sizes can be combined with each other into the double or triple pumps.
extended long service life
High resistance to particle contamination
Suitable for fatigue-resistant drives with high power and high pressure with very large load cycle numbers
APPLICATION:
Plastics processing machines
Foundry machines
Lubrication
Machines tools
Automated Presses
